Need help?Do you have a question about the LELY 1250 PROFI and is the answer not in the manual?
General| Brand | LELY |
|---|---|
| Model | 1250 PROFI |
| Category | Farm Equipment |
| Language | English |
Details the factory's warranty policy for replacement parts and conditions under which the warranty may not apply.
Discusses optional equipment for the Lely Lotus, specifically the spare rotor wheel support for quick tire repair.
Explains the meaning of DANGER, WARNING, and CAUTION signal words used in the manual for hazard communication.
Provides essential safety guidelines for operating and maintaining the Lely Lotus, emphasizing safe practices and precautions.
Details the meaning and purpose of various safety decals found on the Lely Lotus.
Explains the meaning of non-safety related decals, such as grease points, found on the Lely Lotus.
Illustrates the locations of safety decals on the Lely Lotus machine for easy identification.
Describes the functions of the hydraulic control panel and its positions (Floating, Neutral, Forward/Reverse) for operating the Lotus.
Step-by-step guide on how to safely and correctly connect the Lely Lotus to a tractor, including PTO and hydraulic connections.
Provides instructions for safely disconnecting the Lely Lotus from the tractor, covering PTO, hydraulic, and electrical connections.
Details the procedure for unfolding the Lely Lotus from transport mode to its operational working position.
Explains how to safely fold and secure the Lely Lotus from its working position into transport mode.
Guide on how to safely engage the PTO and start the tedding process with the Lely Lotus.
Instructions for lifting the rotors to the headland position for adjustments or turns.
Procedure for safely stopping the tedding operation, including PTO disengagement and securing the machine.
Details how to adjust the tine position (A/B) for different spreading patterns and field conditions.
Explains how to adjust the rotor wheel height for different crop types and transport conditions.
Provides steps for adjusting the rotor angle to ensure proper ground contact and crop pickup.
Outlines scheduled maintenance tasks and their intervals: after operation, every 10, 50, 100, 250 hours.
Tasks to perform immediately after operating the Lotus, including cleaning and checking tines.
Routine maintenance task: Grease the drive line.
Routine maintenance task: Grease the pivot points.
Routine maintenance task: Grease the PTO shafts.
Routine maintenance task: Inspect hydraulic hoses for damage or wear.
Important maintenance task: Replace all hydraulic hoses six years after their production date.
Tasks to perform before storing the Lotus for an extended period, including greasing and checks.
Tasks to perform after the Lotus has been stored for a long time, including greasing, oil changes, and checks.
General preventive maintenance procedures, focusing on cleaning the Lotus and checking components.
Instructions for thoroughly cleaning the Lely Lotus using a water jet and ensuring proper drying.
Detailed procedure for greasing the drive line, including required grease and tools.
Instructions for greasing the various pivot points on the Lely Lotus for smooth operation.
Guide on how to grease the PTO shaft, including specific grease points and precautions.
Step-by-step guide for replacing the grease in the gearbox, including required materials and procedure.
Procedures for correcting issues like worn or broken tines.
Detailed instructions for replacing worn or broken tines on the Lely Lotus, including color coding.
Procedure for adjusting the deflection of the rotors to ensure proper operation and prevent damage.
Presents the mechanically controlled hydraulic schematic for the Lely Lotus.
Specifies standard torque loads for various bolt and nut qualities used on the Lely Lotus.
Illustrates the recommended tyre pressure settings for the Lely Lotus.
To Next Page