3.7 Move the Lotus from the working position to the headland
position
Procedure
1. Operate the tractor hydraulic system to lift the tedder to the headland
position.
The headland position lifts the rotors from the ground, so it is possible:
Make sure you will not manoeuvre yourself in a dangerously position
when performing adjustments or maintenance. Preferably perform
adjustments or maintenance whilst in transport position.
• to make operation adjustments (page ‑1) after disengage the
tractor PTO, if neccessary.
• to drive to an other position in the field.
• to make a turn at the side of the field.
3.8 Stop Tedding
Procedure
Always switch off the tractor engine before you leave the tractor cab.
1. Stop the tractor.
2. Disengage the PTO shaft.
3. Move the Lotus to the transport position (page 3‑9).
Wait for all moving parts of the Lotus to stop.
4. Switch off the tractor engine.
WARNING
WARNING
WARNING
Operation 3-13
T-H021.1301EN
To Next Page
Loading...
