LELY 1250 PROFI - Maintenance; Scheduled Maintenance; Maintenance After Operation; Maintenance Every 10 Working Hours

5. MAINTENANCE
5.1 Scheduled maintenance
5.1.1 Maintenance after operation
• Clean the Lotus (page 5‑4).
• Make sure the tines and tine arms are tight and not damaged.
• Apply anti-corrosion agent to the bare metal parts.
5.1.2
Maintenance every 10 working hours
• Grease the drive line (page 5‑5).
5.1.3 Maintenance every 50 working hours
• Grease the pivot points (page 5‑6).
5.1.4 Maintenance every 100 working hours
• Grease the PTO shafts (page 5‑7).
5.1.5 Maintenance every 250 working hours
• Make sure the hydraulic hoses are not damaged or worn. Replace if
necessary.
Maintenance
5-1
T-H021.1301EN