5.2 Preventive maintenance
Make sure that the PTO shaft is disengaged and the tractor engine is
switched off before maintenance is made.
5.2.1
Clean the Lotus
Procedure
1. Make sure the Lotus is in the working position.
2. Use a water jet to thoroughly clean the Lotus.
3. Move the Lotus to the headland position (page 3‑13).
Make sure the tines and tine arms are tight and not damaged.
4. Carefully engage the PTO at the lowest possible engine speed until all
the water is removed from the rotors.
5. Apply anti-corrosion agent to the bare metal parts.
WARNING
WARNING
5-4 Maintenance
T-H021.1301EN
To Next Page
Loading...
