4.1059.8506.0 A
Operating Instructions 6-3
Figure 12. Connect the rake to the tractor
KEY:
1. Headstock - 2. Top link pin - 3. Parking jack - 4. Linkage pin (2x) - 5. PTO shaft
6.3 Put the Rake into the Transport Position
Make sure there are no persons in the area when you move the
rake to the transport position.
Use all lighting and warning signals required by law (or other
regulations prescribed by the authorities).
Never allow the PTO shaft to rotate when the rake is in the
transport position.
The folded–up safety guards ensure that the rotor is blocked.
The rake can be transported by the tractor after it has been put into the
transport position.
To Next Page
Loading...
