LEM 587 - Instructions for Use; Changing Blades and Pusher Plates

Instructions for Use
1. Blades and pusher plate are
changed easily by raising the
handle and sliding the pusher
plate back.
2. Pusher plate is removed by
turning the white knob on the
back to the right and pulling the
pusher plate out of the cutter.
3. Lift the French Fry Cutter
so the cutting blade can be
removed f r o m the bottom.
4. Blade is removed by pushing
the button on the top then
ca r e f u lly sliding the blade
out of the f r a m e.
5. Slide the blade you have
chosen through the opening at the
bottom until the button pops into
place. Sharp edges of the blade
must face the inside of the f r am e.
6. L i ne up the opposing pusher
plate on the stainless steel plate
and turn the white knob to the
left to lock into place.