EasyManua.ls Logo

LEM H150A User Manual

Default Icon
14 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the LEM H150A and is the answer not in the manual?

LEM H150A Specifications

General IconGeneral
BrandLEM
ModelH150A
CategorySpeaker System
LanguageEnglish

Summary

IMPORTANT SAFETY INSTRUCTIONS

Technical Specifications

1. Introductions

3. Instructions for use and installation

1. Protection and maintenance.

Guidance on proper placement and care to ensure correct operation and avoid damage from environment or unauthorized opening.

2. Prevention of possible interference.

Avoid placing near electronic devices that cause interference; use SHIELD switch for earth loops to prevent hum.

3. Connections.

Connect to mains with correct voltage (±10%). Always connect/disconnect other equipment with enclosure off; switch mixer on first.

4. Connector cables (fig. 4).

Use screened signal cables with XLR or JACK connectors; ensure cables are in good condition and correctly wired.

4. The HURRICANE ACTIVE series (fig. 1)

5. Installation and connections

1. Installation

Loudspeakers have adapters for stands; sub-woofers have top adapters for satellite pole mounting.

2. Connections

Use BALANCED signal cables (XLR/JACK) for line signals; adjust VOL control for input level.

3. SUB + SATELLITE systems (see fig. 4)

Lists suggested subwoofer-satellite setups and their total power for various configurations.

6. Connection panel (fig. 3)

Related product manuals