LEMAX 05698 - Operating Instructions; Setting Up the Product; Filling the Water Tank

P. 4
1. Setting up the product
• Place the unit on flat, level surface.
•Take away the adhesive tape on the chimney (Dia.1).
• Ensure Smoke On/Off button on right side of the unit in off position "O" (Dia. 2).
•Insert the jack of the adaptor (F) into the reception socket at the back of the unit (Dia. 
3). Plug the adaptor into a household electrical outlet.
•This power unit is intended to be correctly orientated in a vertical or floor mount 
position.
Please note!
vSuggest using the adaptor provided.
OPERATING INSTRUCTIONS :
(3)
(2)
(1)
2. Filling the water tank with water
• Remove the roof cover (D) and the inner lid (E) from the unit (Dia. 4).
•Fill the water tank with approximate 650 mL (21.98 fl.oz.) water to the puffy mark 
(Dia. 5).
•Put the inner lid and then the roof cover back onto the unit.
Important!
vWater level should not exceed the puffy mark.
vUse clean room-temperature tap water.
(5)
(4)