LEMAX 05698 - Turning On the Product; Controlling the Smoke Function; Refilling the Water Tank

P. 5
4. Turning on and turning off smoke
•Ensure Power Cord extending from rear of the unit in on position " - " (Dia. 6). 
•Shift Smoke On/Off button to on position " - " (Dia. 7) to activate the smoke function.
•Wait about 2 minutes for water absorption by the wick (B). "Smoke" will come out 
through the chimney.
•Shift Smoke On/Off button to off position "O" (Dia. 8), smoke will stop.
5. Refilling the water tank
•When water inside the water tank runs out to lower 
level, there is no smoke and a red light will flash 
(Dia. 9).
•Shift Smoke On/Off button to off position "O" 
(Dia. 8), the red light will go off .
•Refill the water tank with water by repeating 
Point (2).
•Shift Smoke On/Off button to on position " - " 
(Dia. 7) to activate the smoke function again. 
Smoke will start again.
3. Turning on the product 
•Locate Power Cord extending from rear of the unit 
and shift the button to on position " - " (Dia. 6).
•When activated, lights will illuminate the unit.
(6)
(7) (8)
(9)