LEMAX 05698 - Replacing the Wick

6. Replacing the wick
•When the wick (B) deteriorates, gets dirt, smoke will go less. Replace it with the 
replacement wick (G) provided.
•Remove Smoke Function Mechanism (A).
•Take out the wick from the chimney.
•Insert the replacement wick into the chimney gently and carefully.
•Cover the replacement wick with Smoke Function Mechanism (Dia. 10).
•Wait about 2 minutes for water absorption by the replacement wick.
Important!
vWhen taking out the wick, and if the supporting spring (C) comes out together, put 
the spring back into the chimney.
vDock Smoke Function Mechanism on to the chimney so that the jut matches the 
small round notche (Dia. 11) correctly. 
vEnsure top part of the wick goes upright into Smoke Function Mechanism.
P. 6
(11)(10)