LEMEGA DR1 User Manual

6.5. Language – the language used for display messages can be
selected from below options: English | Espanol | Francais | Italiano |
Nederlands | Norsk | Polski Suomi | Dansk | Deutsch. Under the
system menu, press the TUNE+/TUNE- button
or rotate SELECT knob to select “Language”
through the list of menu, Push the SELECT
knob to confirm to fig.12. Cycle through
Language menu by press the TUNE+/TUNE- button
or rotate SELECT knob to select, select and
stop at a particular language, Push the SELECT knob to confirm.
6.6.
6.7.
Factory Reset – this function clears all user defined settings,
replacing them with the original default values, so time/date,
preferences/settings, DAB station list and
preset stations are all lost.
Under the system menu, Rotate SELECT knob
to select “Factory Reset” through the list
of menu, Push the SELECT knob to confirm
to fig.13. Then, or rotate SELECT knob to
choose <Yes> and Push the SELECT knob to start the factory reset.
Software Upgrade- From time to time, DR1 may make software
upgrades available with bug Fixes and/or additional features.
This feature is for service centre.
6.8. Software version – this is used to display the current software
version. Under the system menu, or rotate
SELECT knob to select “Software version”
through the list of menu fig.14, Push the
SELECT knob to confirm. Then, the existing
SW version will be showed.
. Scan setting - by default, FM scans stop at a Strong stations only.
Options: Strong stations only / All stations under menu list, rotate
SELECT knob to select a particular option in “Scan setting”, then
Push the SELECT knob to confirm the change to new setting to fig15.
3. Audio setting - by default, all stereo stations are reproduced in
stereo. For weak stations, this may result in poor quality audio. The
audio quality can be improved using mono. Options: Stereo allowed
Forced mono under menu list, rotate SELECT knob to select a
particular option in “Audio setting” , then Push the SELECT knob to
confirm the change to new setting. It will automatically change to
new setting after 3 seconds.
4. System - Please refer to above description point 6 “System”.
2
Model: DR1
Type: Portable DAB & FM Radio
Power output: 1CH X 2W
Power Supply: 5V DC or 4AA batteries [battery not included]
Dimension (mm): 175*106*54MM
Weight: 0.45KG
Specifications are subject to change without notice.
info@lemegaaudio.com
www.lemegaaudio.com
TECHNICAL SPECIFICATION
FM mode
1. If the DR1 is in FM mode, Press MENU button
to enter the menu list to fig.15. Rotate SELECT
knob to select option through the list of menu.
Then, stop at your preferred option and Push
the SELECT knob to confirm. The menu options are:
scan setting, audio setting, and system.
9 10
If you have any questions
or suggestions, please share with us.

LEMEGA DR1 Specifications

Power

power output	1CH X 2W
power supply	5V DC or 4AA batteries

Weight and Dimensions

weight	0.45 kg
dimensions	175 x 106 x 54 mm