LEMEGA DR1 User Manual

list. Under menu list, press the TUNE+ button or rotate SELECT
knob to select “Manual tune” through the list of menu, Push SELECT
knob to confirm. Rotate SELECT knob to select a particular
channel/frequency and then Push SELECT button to confirm the
setting to fig.5. The display shows a live indication of the received
signal strength on the selected frequency. Adjustments to your
antenna will be manifested in the received signal strength displayed.
4. DRC (Dynamic range compression) – this function reduces the
difference between the loudest and quietest audio being broadcast.
Effectively, this makes quiet sounds
comparatively louder and loud sounds
comparatively quieter.
Options: off (default)/high/low under
menu list, press the TUNE+/TUNE- button or
Rotate SELECT knob to select “DRC” through the list of menu, Push
SELECT button to confirm. Then press the TUNE+/TUNE- button or
Rotate SELECT knob to select a particular setting and Push
SELECT knob to confirm the setting to fig.6.
5
6
. Prune – this removes all invalid stations indicated in the station
list with a '?' in front of the station name.
Under menu list, Rotate SELECT knob
to select “Prune” through the list of menu,
Push SELECT knob to confirm to fig.7.
. System – the System menu options are:
Sleep /Alarm / Equaliser / Time / Backlight /
Language/, Factory Reset /
Software upgrade / SW version to fig.8.
6.1 Sleep – when listening to the radio you can set a period of time
before the radio enters 'standby' mode.
Note: the radio must be active and not in
'standby' mode already.
Under the system menu, Rotate SELECT
knob to select through the list of menu,
push in SELECT knob to confirm Sleep to fig.9.
Then press TUNE-/TUNE+ button or rotate SELECT knob to select
< sleep off / 15mins / 30mins / 45mins / 60mins / 90mins > and Push
SELECT knob to confirm.
6.2 Alarm- Press Menu>System setting> Alarm. There are 2 Alarms,
you can press and hold Play/Pause button to switch to Alarm 2.
Alarm 1 set up: Press SELECT knob to set on time/Source/
Frequency / Volume then push SELECT knob to confirm the settings.
Parameters
Alarm – Off | On
Source – DAB/FM/Buzzer
Frequency - Daily | Once | Weekends | Weekdays
6.3. Time – if there is any DAB+ radio signal,
the machine will automatically update the time,
there is no signal, can also be set manually
to fig.10.
*Set Time/Date: set hour / set minute / set month / set date>
set year > saved
*Auto update options: update from Any / update from DAB /
update from FM / no update
*Set 12/24 hour: 12hour/24 hours
*Set date format: DD-MM-YYYY.
6.4. Backlight – this radio display has a backlight which can be
adjustable. You can select the time out of
the display backlight of your radio. Under
the system menu, press the TUNE+/TUNE-
button or rotate SELECT knob to select
“Backlight” through the list of menu,
Push the SELECT knob to confirm to fig.11.
You can now use the TUNE+/TUNE- button or rotate SELECT knob
to select < 10sec / 20sec / 30sec / 45sec / 60sec / 90sec / 120sec /
180sec / On >, and Push SELECT knob to confirm.
7 8

LEMEGA DR1 Specifications

Power

power output	1CH X 2W
power supply	5V DC or 4AA batteries

Weight and Dimensions

weight	0.45 kg
dimensions	175 x 106 x 54 mm