2
3.
4.
5
6.
. TUNE+/ : Press to select the next track under FM/DAB mode;
Press and hold the Tune+ button 2 seconds to auto-scan the stations
under the FM /DAB mode.
TUNE-/ : Press to select the previous track under FM/DAB
mode; Press and hold the Tune- button 2 seconds to auto-scan the
stations under the FM/DAB mode.
Menu: press the MENU to show the MENU for the current mode.
Press again to show now playing screen.
. BACK: press the BACK to return to the previous screen.
: In DAB/FM mode, press and hold PLAY & PAUSE button, it
will automatically scan for the available radio stations.
7. SELECT/ POWER/VOLUME/MUTE/SNOOZE:
a. SELECT: Rotate the SELECT knob scroll through a menu or
station list. Press to the SELECT knob to select the chosen option.
b. POWER: Turn on or back to standby mode (showing clock and
date), or cancel sleep, or cancel alarm function.
1) Push to power the DR1 On or Off (Standby). When powered on
for the first time in DAB mode, It will
automatically scan for the available
radio stations to fig.1.
2) When your DR1 is using power adapter,
press POWER knob to switch 'on' and 'standby'
to fig.2. Unplug the power adapter to turn off
your DR1 completely.
3) When your DR1 is using batteries,
press SELECT knob to switch 'on' and 'off'.
c. VOLUME: Rotate the SELECT knob to adjust the volume up or
down during playback.
d. MUTE: Press the SELECT knob to mute the music when playing.
e. SNOOZE: Press the scroll button to snooze a set time when alarm
sounding.
8
9.
. Info: When in DAB mode, briefly press repeatedly to view DLS
[Dynamic Label Segment], signal strength, PTY [Programme Type],
ensemble, frequency, signal quality, bit rate codec, time, date. In FM
mode, view radio text, PTY [Programme Type], PS [Programme
Service], stereo/mono, time, date etc.
SOURCE: Briefly press to cycle through the sources: DAB, FM.
In FM mode, DR1 will tune to the start of the
available FM range (87.50MHz) or the
last FM station listed to fig.3.
To manually change the FM frequency,
make sure that you have not selected any other sub-menus. Turn the
TUNE+/TUNE- to change the frequency by 0.05MHz.
DAB mode
In DAB mode, press MENU button to enter the menu list to fig.4.
Press the TUNE+/TUNE- button to select
option through the list of menu or rotate
SELECT knob to scroll the menu list.
Then, stop at your preferred option and
Push the SELECT knob to confirm.
The menu options are: full scan/ manual tune/ DRC /prune/ system.
Full scan – under menu list, rotate the SELECT knob to select
“Full scan“through the list of menu, Push the knob to confirm and full
scan starts automatically to fig.4. Once a scan is completed, the
radio returns to play the previously-selected station or first station
on the station list.
Note: if no radio station found, it shows “No DAB station”.
For a better reception, extend the antenna or do the full scan again
in another place.
1.
2.
3. Manual tune – as well as the normal method of scanning, you can
also manually tune to a particular channel/frequency. This can be
useful for adjusting your antenna to achieve the best possible
reception and scanning a particular channel to update the station
5 6
To Next Page
Loading...
Need help?
Power
Weight and Dimensions
