Need help?Do you have a question about the LEMKEN RUBIN 10 and is the answer not in the manual?
Defines intended use, time, and spatial limits for the machine's operation.
Outlines qualifications and responsibilities for operators, users, and service personnel.
Covers essential safety guidelines for operating instructions and machine condition.
Details safety precautions related to hazardous areas around the machine.
Warns about safety risks associated with structural modifications and welding.
Provides safety advice for specific situations like parking the machine.
Details safety features, including label positions and meanings.
Explains the iQ contour Rubin system for automatic depth adjustment.
Details checks for tractor power, hitch, electrical, and hydraulic compatibility.
Instructions for preparing the compressed air brake system before initial use.
Checklist for preparing the machine's components and safety devices for road travel.
Covers fundamental operations like folding and using the compressed air brake.
Step-by-step instructions for folding and unfolding the machine.
Details adjustments for working depth, outer discs, rebound harrow, etc.
Guides on adjusting working depth for front and rear concave discs.
Covers standard procedures for field work and headland driving.
Step-by-step guide for working in the field and completing soil cultivation.
Step-by-step guide for safely detaching the machine from the tractor.
General guidelines for proper maintenance and identifying tasks for service personnel.
Safety advice and precautions to follow during maintenance and repair.
Details the maintenance schedule and specific checks.
Lists tasks and their frequency for maintaining the machine.
Provides a lubrication schedule for various machine components.
Details lubrication points and their required frequency.
General procedure for identifying and correcting machine errors.
A table listing common faults, their causes, and remedies.
Guides on calculating axle loads and required ballasting for mounted machines.
General| Disc Diameter | 645 mm |
|---|---|
| Number of Discs | 20 - 56 |
| Row Spacing | 12.5 cm |
| Disc Angle | 20° |
| Working Width | 2.5 m - 7.0 m |
To Next Page