4
Description
1. Counterweight
The counterweight is used for precise adjustment of the stylus
pressure on the vinyl, to properly balance the tone arm.
2. Anti-Skating Control
Use this to set the anti-skating function of the tone arm.
3. Tone arm Lever
Use this lever to lower and raise the tone arm.
4. Tone arm Lock (arm rest)
Use this to lock the tone arm in place when not in use.
5. Headshell
This holds the stylus (“needle”) in place and provides protection by
means of its removable stylus protection cap (not shown)
6. Platter:
To Next Page
Loading...
