7
Mains Connection
An external switching power adaptor (DC24V/1A) is supplied with this
turntable. Your unit is ready to be connected to a main voltage of
110V/60Hz or 230V/50Hz.
Amplifier Connection
There is a Phono/Line selector next to the RCA jack on the rear panel of
the turntable.
If your amplifier has “PHONO” input, switch the selector to “PHONO”,
and connect the RCA plug to the PHONO INPUT of your amplifier.
If your amplifier hasn’t “PHONO” input, switch the selector to “LINE”,
and connect the RCA plug to the “LINE” input of your amplifier.
Red plug into R channel input, White plug into L channel input.
With the PRE-AMP switch at ON never connect to a Phono input.
Audio will be strongly distorted then and there is a risk that
Amplifier and/or speakers will be damaged.
To Next Page
Loading...
