10
4. Press the MENU button on the remote control to exit the menu control.
FM RADIO OPERATION
Auto Scan
1. Turn on the unit in FM mode.
2. Press and hold the SCAN button to start auto-scanning and saving the available stations (max. 20 storage).
Manual Scan
1. Press the TUNE or TUNE button repeatedly to tune to a different frequency.
2. Alternatively press and hold the TUNE or TUNE button to automatically search to the next available station.
Storing FM Presets
You can save up to 20 FM stations.
1. Tune to the station you wish to store.
2. Press and hold the MEMORY button. Flashing “PROG” is displayed.
3. Press the TUNE or TUNE button to a preset number that you want to store. Then press the ENTER button to save.
Recall FM Presets
Press the CH- or CH+ button directly tune to the preset channel.
Stereo/Force Mono Selection
When receiving a stereo broadcast FM station, press the MONO/ST button will switch between stereo audio or force mono audio.
Displaying FM Station Information
There are several types of information as listed below. To change the display information press the INFO button repeatedly.
1. Radio Text
Scrolling text which displays information about music title or program details provided by the active radio station.
2. Program Type (PTY)
Type of program provided by the broadcaster.
3. Frequency
Current channel frequency.
4. Audio Type
Stereo or Mono.
OTHER FM MENU OPERATION
Press the MENU button on the remote control to access the menu control. Then press the PREVIOUS or NEXT button for
different options as described below.
Scan Setting
1. Press the MENU button on the remote control to access the menu control.
2. Press the PREVIOUS or NEXT button until “SCAN” is displayed and then press the ENTER button.
3. Press the PREVIOUS or NEXT button to toggle between “ALL” or “STRONG” selections and then press the ENTER button
confirm. When “ALL” is selected, all stations will be detected during FM scanning even if the radio station is noisy. When the
“STRONG” is selected, only the strong stations are detected. Scanning will ignore those noisy stations.
4. The next time doing a FM scan the unit will search for the stations based on this confirmed setting.
Audio Setting
1. Press the MENU button on the remote control to access the menu control.
2. Press the PREVIOUS or NEXT button until “AUDIO” is displayed and then press the ENTER button.
3. Press the PREVIOUS or NEXT button to toggle between “STEREO” or “MONO” selection and then press the ENTER button
confirm.
To Next Page
Loading...
Need help?
General
