EasyManua.ls Logo

LENCO MCI-200 User Manual

LENCO MCI-200
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Attention:
- To ensure sufficient ventilation, keep the spacing shown as below:
(add line drawing)
- Do not remove the plastic cover of FM Antenna (A) at the back of the unit.
(add line drawing)
Main Unit Front Panel Description
1. CD Player.
2. ON/STANDBY button to turn on or off the unit. Press over 5 seconds. It turns
to ECO mode and also back to STANDBY mode when pressed over 5
seconds again.
3. SOURCE button to select TUNER, CD, UDISK (for USB), SD/MMC, iPOD,
and AUX source.
4. BAND/FOLDER button to select MW or FM band in radio mode or folder
selection during MP3/WMA playback.
5. ST/MONO button to select stereo or mono output for FM band.
6. PROG/PRESET button to enter program mode to select program playback,
or to memorize stations for tuner ,auto scan and preset tuner stations when
pressed over 5 secs.
7. button to select next track in CD/USB/SD-MMC/iPOD mode, when
pressed long it will change to fast forward play, or to adjust the clock during
clock/timer/alarm setting or to increase the frequency in Tuner mode.
8. button to select previous track in CD/USB/SD-MMC/iPOD mode, hwne
pressed long it will change to fast backward play ,or to adjust the clock
during clock/timer/alarm setting or to decrease the frequency in Tuner
mode.
9. RANDOM button to select random playback in CD/USB/SD-MMC/IPOD
mode ,or to select the previous preset channel in Tuner mode
10. phones.
11. SD/MMC CARD slot for SD or MMC card memory.
12. USB slot for USB memory.
13. Remote sensor to receive the remote control signal.
14. LCD display.
15. button to eject CD disc
16. MENU button to enable menu mode.
17. VOL + Button to increase the Volume
18. VOL– Button to decrease the Volume
19. button to play or pause a track in CD/USB/SD-MMC/iPOD playback or to

Other manuals for LENCO MCI-200

Question and Answer IconNeed help?

Do you have a question about the LENCO MCI-200 and is the answer not in the manual?

LENCO MCI-200 Specifications

General IconGeneral
BrandLENCO
ModelMCI-200
CategoryStereo System
LanguageEnglish

Summary

Main Unit Front Panel Description

ON/STANDBY Button

Controls unit power, ECO mode, and standby status. Press over 5 seconds for mode change.

SOURCE Button

Selects audio input source: TUNER, CD, UDISK (USB), SD/MMC, iPod, and AUX.

PROG/PRESET Button

Enters program mode, memorizes tuner stations, or auto-scans stations.

Playback Control Buttons

II button plays/pauses tracks. ■ button stops playback or returns to previous menu.

Remote Control Functions

Power and Source Selection

ON/STANDBY for power control; SOURCE selects input sources.

Track Playback and Search

Buttons for playing, pausing, skipping tracks, and searching within tracks.

User Operations

Turning the Unit On/Off

Press ON/STANDBY to turn on; press again for standby. Long press enters ECO mode.

Menu Setting Configuration

Accesses settings for Clock, Timer, Alarm, EQ, and Bass via the MENU button.

Menu Setting Details

Setting the Clock

Adjusts the real-time clock display and format (12/24hr).

Related product manuals