6
3. Identification of Controls
Remote control unit
1.
SOURCE
DVD/CARD/USB/AV IN.
2.
MUTE
Disable Audio output.
3.
0-9 NUMBER BUTTON
Selects numbered items in a menu.
4.
DISPLAY
To display the playtime and status information.
5.
10+ BUTTON
In order to select a track 10 or greater, first press 10+, For example; select track 12,
first press 10+, and then press number 2 button.
6.
MENU/PBC
Return to DVD root menu(DVD).
PBC on/off switch (VCD).
7.
AUDIO
DVD: Press AUDIO repeatedly during playback to hear a different audio language or
audio track, if available.
CD/VCD: Press AUDIO repeatedly during playback to hear a different audio channel
(Left, Right, Mix, Stereo).
8.
PLAY/PAUSE
Press PLAY/PAUSE once to pause playback, pressing PLAY/PAUSE second time will
resume the playback.
9.
STOP
When this button is pressed once, the unit records the stopped point, from where
playback will resume if PLAY ( ) is pressed after wards. But if STOP button is pressed
again instead of PLAY ( ) button, there will be no resume function.
10.
MODE
Set LCD parameter (adjust brightness, contrast, and saturation).
11.
VOL+
12.
Forward Skip
Go to next chapter/track.
13.
Reverse Skip
Go to previous chapter/track to the beginning.
14.
BUTTON
Press BUTTON allow skipping ahead at 5-level speed (X2->X4->X8->X16->X32-
>PLAY), press PLAY button return to normal playback.
To Next Page
Loading...
Need help?
General
