8
4. Setup Menu Setting
General Setup Page
Press SETUP button to get the setup menu. Use direction buttons ▲▼◄► to
select the preferred item. After finishing settings, press SETUP again to normal
display.
The following menu items can be changed:
GENERAL: selects the GENERAL PAGE menu.
AUDIO: selects the AUDIO PAGE menu.
VIDEO: selects the VIDEO PAGE menu.
PREFERENCE: selects the PREFERENCE PAGE menu.
General Setup Page
TV DISPLAY: selects the aspect ratio of the playback picture.
4:3 PANSCAN: if you have a normal TV and want both sides of the picture to be
trimmed or formatted to fit your TV screen.
4:3 LETTERBOX: if you have a normal TV. In this case, a wide picture with black
bands on the upper and lower portions of the TV screen will be displayed.
16:9: wide screen display.
TFT DISPLAY: Selects the TFT display to 16:9 or 4:3.
Angle Mark
Displays current angle setting information on the right hand corner of the TFT
screen if available on the disc.
OSD Language
You can select your own preferred language settings.
Closed Captions
Closed captions are data that are hidden in the video signal of some discs.
Before you select this function, please ensure that the disc contains closed
captions information and your TV set also has this function.
Screen Saver
This function is used to turn the screen saver On or Off.
AUTO STANDBY
This function is used to put the device in the standby mode.
Audio Setup Page
To Next Page
Loading...
Need help?
General
