LENCO PA-80 Instruction Manual

1. Make sure all items listed on the front of this guide are included in the box.
2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING
THE PRODUCT.
3. MAKE SURE THAT YOU HAVE COMPLETELY CHARGED
THE BATTERY PRIOR TO FIRST USE FOR MAXIMUM
BATTERY LIFE.
4. Study this setup diagram.
5. Place product in an appropriate position for operation.
6. Make sure all input devices such as microphones,CD players, mp3 players, and linked amplifiers/
PAs are turned off and volume settings are set at "zero".
7. Connect all devices as shown above.
8. Connect the stereo outputs to the power amplifier(s), tape decks, and/or audio sources.
9. Switch everything on in the following order.
audio input sources ( i.e. microphones, instruments, CD/MP3 Players)
PA-80
last, any amplifiers
When turning off, always reverse this operation:
amplifiers
PA-80
last, any input devices

LENCO PA-80 Specifications

Power

input voltage	AC 100-120V/ 60Hz 220-240V/ 50Hz
power consumption	70 WATTS

Battery

time required to fully charge	under 4 hours
battery life	over 12 hours

Audio Specifications

frequency response	70Hz~ 50kHz +/- 3dB

Weight and Dimensions

produce dimensions	350x428.5x245.5mm (wxhxd)
bottom pole mount depth	80mm (3.15”)
bottom pole mount diameter	35.5mm (1.40”)