EasyManua.ls Logo

LENCO PDR-03 - Troubleshooting Guide; Product Specifications

LENCO PDR-03
79 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5. Trouble Shooting
* There is no sound from the speaker.
Check if the volume level is turned up;
* The sound is distorted.
The volume is too high, turn down the volume level.
Adjust the antenna to get a stronger signal reception.
* Not find the desired stations.
Use the manual tune function to find the station.
Signal reception is too low, adjust the antenna or move to a stronger
signal location.
* Texts display abnormal on the screen.
No DAB coverage in your area, adjust the position of the aerial.
Turn off the machine, then turn back on again.
* A burbling noise on some stations.
Batteries power is low, exchange some new batteries.
Re-position the aerial to get the best reception.
Power input
Battery
Power consumption
DAB Frequency
FM frequency
DC 5V---750mA
4 x 1.5V (AA type)
3.5W
174 -240MHz
87.5-108MHz
6. Specification
Power supply adaptor
Model Number: DZ006HL050075V
Use only power supplies listed in the user instructions.
Manufacturer: Guangdong Keerda Electronic Co., Ltd.
(For EU only)
Input: 100-240V~50/60Hz, 0.15A
Output: 5V---0.75A
10

Related product manuals