10
button to begin the programmed playback with the programming
order identical with the previous one done; press the STOP/CH-
button again to clear the programming.
AUX IN
1. Connect the AUX IN jack on the unit to an audio source, for
example, MP3 player with an audio cable.
2. Power on the unit following the corresponding instructions.
3. Press the SOURCE button repeatedly to switch to AUX mode.
4. Use the native controls on the connected audio device to begin
playing music through the connected unit.
STEREO PHONE JACK
A stereo phone jack has been provided on the back side of the
player so that you can listen without disturbing others. To use this
jack, plug in the headphones/earphones (NOT INCLUDED) and
adjust the volume level to a preferred level.
NOTE: When external headphones/earphones are connected, the
speakers will be muted.
CAUTION: Listening at high power for a long moment could damage
users' ears.
To Next Page
Loading...
