9
REPEAT PLAYBACK (CD/MP3/USB)
During playback, press the MEM/MODE/PROG button to repeat play
a single track; press the button twice to repeat play all tracks; press
the button three times to enter the introduction play mode; press the
button four times to enter the random play mode; press the button
five times to exit.
PROGRAMMED PLAY (CD/MP3 DISC/USB)
1. In stop mode, press the MEM/MODE/PROG button once, the
program’s icon shows with a program sequence indication "P01"
first, then a track number flickers on the LCD with the program’s
icon.
2. Select the first track to be programmed using the SKIP/SEARCH
UP button or the SKIP/SEARCH DOWN button, and then press
the MEM/MODE/PROG button again to store and advance to the
next programming step (If there are several folders on the MP3
disc or USB, it is necessary to program folders first and then the
tracks. The method of the folders programming is the same as the
tracks programming.).
3. Repeat the above steps to program more tracks. A maximum of 20
tracks for CD and 99 tracks for MP3 disc/USB can be
programmed in memory in a preferred order. If the memory is full,
the screen will show “FUL” for indicating.
4. Press the PLAY/PAUSE/CH+ button to begin programmed play in
the preferred order after you are done with programming. The
player stops automatically after all programmed tracks are played.
5. You may press the STOP/CH- button to terminate programmed
playback. In program stop mode, press the PLAY/PAUSE/CH+
To Next Page
Loading...
