Need help?Do you have a question about the LENCO SCD-42 and is the answer not in the manual?
Cassette Section| track format | 2 track stereo |
|---|---|
| tape speed | 4.75 cm/sec |
| frequency response | 125 Hz - 8000 Hz |
CD Section| channels | 2 channels |
|---|---|
| S/N ratio | 60 dB |
| sampling frequency | 44.1 kHz |
Radio Section| tuning ranges | FM 87.5 - 108 MHz |
|---|---|
| antennas | FM Rod antenna |
General| output power | 1.2W + 1.2W (RMS) |
|---|---|
| power consumption | 13W |
| dimensions | 288(L) x 238(D) x 155(H) mm |
Warning about the low power laser device and avoiding beam exposure.
Guidelines for handling the AC cord, appliance use, voltage checks, and placement.
Advice on preventing condensation, ensuring ventilation, and battery disposal.
Identification of all buttons, ports, and indicators on the device.
Instructions for connecting to AC power or using batteries.
How to turn the unit on/off and switch between CD, Radio, and Tape.
Step-by-step guide to setting the clock display.
How to control volume and use headphones.
Steps for tuning radio stations and adjusting audio.
Tips for improving FM stereo reception quality.
Instructions for inserting, playing, pausing, and stopping CDs.
How to skip tracks and search within a CD track.
Using PLAY MODE for repeat, repeat all, and mix playback.
How to create a custom playback sequence for CD tracks.
Important considerations for using recordable CD media.
Steps for playing, pausing, stopping, and rewinding cassette tapes.
Guidance on cleaning the unit, CD lens, and CDs.
Instructions for common issues and warnings regarding CD door operation.
Detailed specs for cassette, CD, radio, and general unit features.
Information on Lenco warranty, service, and obtaining help.
Instructions for product disposal, CE marking, and hearing protection.
To Next Page
