LENCO SCD-720 - Powering On and Audio Output; AC Power Connection and Activation; Headphone and Speaker Output; Selecting Audio Sources

-9-
POWER ON THE SCD-720
~AC IN
OPEN
OPEN
AUX IN
SOURCE
MENU
INFO
ENTER
SCAN
FOLDER
PAIR
REPEAT
PROGRAM
1
2
3
4+
VOLUME
CASSETTE RECORDER
EAR/HEADPHONE USE
On the back site of the SCD-720 you will nd the headphone connection.
Use a ear set or headphone with 3, 5mm stereo jack to connect the headphone to the SCD-720.
If you put in the 3,5mm stereo jack the speakers of the SCD-720 will turned o󰀨.
Only the headphone will work now.
You can control the volume by the volume knob. All other functions are the same as normal use without headset connected.
~AC IN
OPEN
OPEN
AUX IN
SOURCE
MENU
INFO
ENTER
SCAN
FOLDER
PAIR
REPEAT
PROGRAM
1
2
3
4+
VOLUME
CASSETTE RECORDER
Connect the SCD-720 with the power cable to the AC outlet.
If you connect the power cable into the SCD-720, the batte-
ry power will be automatically shut down.
Press the STANDBY button to turn on the unit.
To turn o󰀨, press the STANDBY button again.
With the SOURCE button you can select input source
You can selected:
DAB+ RADIO
FM RADIO
CD
USB
BLUETOOTH
TAPE (CASSETTE)
AUDIO IN (AUX)
VOLUME CONTROL:
Rotate the VOLUME knob to change the volume.