EasyManuals Logo

LENCO SCD-971 User Manual

LENCO SCD-971
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
GB 4
PROGRAMMED PLAYBACK
PROGRAMMED PLAYBACK
FOR NORMAL COMPACT DISC PLAYBACK
Programmedplaybackenablestracksonadisctobeplayed
inthedesiredorder.Upto20trackscanbeprogrammed.
1. Press the " PROGRAM " button.
2. Press the " NEXT "and" BACK " buttons to select
the desired track number.
3. Press the " PROGRAM " button again to memorize
the track.
4. Repeat steps 2 and 3 until all desired tracks are
programmed.
5. Press the " PLAY/PAUSE " button to start.
" " , " PROG " & track number are shown on the
LCDdisplay.
6. Press the " STOP " button once to stop programmed
playback.
LCDdisplay
" PROGRAM "
Note on CD-R/RW discs
- Becauseofnon-standardizedformatdenition/productionofCD-R/RW,
playbackqualityandperformancearenotguaranteed.
- ManufacturerisnotresponsiblefortheplayabilityofCD-R/RWduetorecordingconditions,suchasPCperformance,
writingsoftware,mediaability,etc.
- DonotattachasealorlabeltoeithersideoftheCD-R/RWdisc.Itmaycauseamalfunction.
- ItisrecommendedtorecordonlyaudiolesonCD-R/RWdiscsforeasyreading.
7. Press the " PLAY/PAUSE " button to resume
programmedplayback.
8. OpentheCDdoor,turnofftheCDplayerorpress
the " STOP " button twice to clear the programmed
memory.
Note: Programming can only be made when the player
is in stop mode.
PLAY MODE
REPEAT , REPEAT ALL AND MIX PLAYBACK
PressPLAYMODEbuttonduringCDplayback.CDplayswithasingletrackrepeat,
alltracksrepeatorrandomly.
FOR NORMAL COMPACT DISC PLAYBACK
ModesequenceREPEAT>>REPEATALL>>MIX>>CLEAR.
DuringRepeat1mode,
displayshows
DuringRepeat2mode,
displayshows
DuringMixmode,
displayshows
LCDdisplay
LCDdisplay
LCDdisplay
CD17CD-LENCO-SCD-971 ENG-TCD19A-no recording  250 MINS.indd 6 30/10/2018 15:44:02

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LENCO SCD-971 and is the answer not in the manual?

LENCO SCD-971 Specifications

Cassette Section IconCassette Section
track format2 track stereo
tape speed4.75 cm/sec
F.F. & REW time170 sec (F-60 tapes)
frequency response125 Hz - 8000 Hz (Normal tape)
CD Section IconCD Section
channels2 channels
S / N ratio60 dB
sampling frequency44.1 kHz 8 x over sampling
pick up wave length790 mm
Radio Section IconRadio Section
tuning rangesFM 87.5 - 108 MHz
antennasFM Rod antenna
General IconGeneral
output power1.2W + 1.2W (RMS)
power consumption13W
dimensions288(L) x 238(D) x 155(H)mm
weight2.2 KGS
operating temperature range0°C to 40°C

Related product manuals