USB port can be used to charge the phone/USB devices. When inserting an USB device,
the system will charge the device if the battery power is low in the phone/USB device.
10
USB operation
You can connect an external device with the unit to play music as a speaker.
1. Connect the external audio player’s audio output with AUX IN socket on the rear panel
of the unit.
2. Press SOURCE button to enter AUX IN mode.
3. Start playback on the external device.
4. You can only adjust the volume by the unit.
5. Turn off both devices before disconnecting them.
Note:
The unit cannot be controlled by buttons on it. You can just use the VOL+/- buttons to
adjust the volume level. If you can not hear any sound from the speaker, please check
the volume on the external device.
Aux in operation
To Next Page
Loading...
Need help?
General
