• 78 • BALTIC-IOM-0412-E / Control manual
INITIALIZATION
If the connection between the CLIMATIC™ 60 and the 'DC60 is not correct (Offl ine) screen displays only the symbol .
In this case, check: :
• the connection between CLIMATIC™ 60 and DC60
• the setting of the DC60
• the power of CLIMATIC ™ 60
If the connection between the CLIMATIC™ 60 and the 'DC60 is correct (Online) to power up the screen displays only the symbol .
This phase allows the CLIMATIC™ 60 to set up the DC60 with options of rooftop.
After some seconds, DC60 is operational.
PRESENTATION
Showing
Control operating mode
Value
Fan operating mode
Label or clock
Staus
Schedule mode
BMS
Alarm
Pump
Compressor(s)
Defrost
Condenser(s)
Heaters
Hidden : to stop
Visible : running
Blinking : in fault
DISPLAY DC60
Day
Day II
Day I
Night
To Next Page
Loading...
