Need help?Do you have a question about the Lennox BAG030SHM and is the answer not in the manual?
General| Brand | Lennox |
|---|---|
| Model | BAG030SHM |
| Category | Air Conditioner |
| Language | English |
General site and unit identification information.
Verification of electrical and refrigerant connections.
Verifying the unit's climatic settings against options.
Checks related to the supply blower and ventilation system.
Detailed checks for the refrigeration system components.
Checks specific to the gas heating system.
Logbook for refrigerant additions, removals, and leak tests.
Procedures for checking equipment upon receipt.
Details provided on the unit's rating plate.
Guidelines for storing the equipment before installation.
Specifies required equipment for safe unit handling.
Table providing unit dimensions and weight data.
Instructions and diagrams for lifting various unit configurations.
Instructions for lifting different types of roof curbs.
Essential checks, site requirements, and forklift protections.
Procedures for positioning roofcurbs and securing the unit.
Details on securing curbs, flashing, and heat recovery installation.
Installation guidelines for economiser and extraction systems.
Guidelines for making power and control wiring connections.
Checks before starting the unit, including motors and wiring.
Procedures for initial unit start-up and powering.
Steps for performing operational tests like cooling and safety checks.
Dimensional drawings for non-adjustable roof curbs.
Dimensional drawings for adjustable roof curbs.
Drawings for multidirectional horizontal roof curbs.
Drawings for vertical and horizontal exhaust roof curbs.
Diagrams illustrating the energy recovery option.
Procedures for checking belt tension and adjusting pulleys.
Methods for adjusting airflow and filter replacement guidelines.
Configuration settings for the fan start control.
Hydraulic connections, filling, and freeze protection for hot water coils.
Information on electric heater sizes, capacity, and general data.
Checks, start-up, pressure adjustments, and safety for gas burners.
Details on the modulating gas burner actuator and pressure adjustments.
Connecting sensors, displays, and BMS to the Climatic controller.
Setting up digital and analog I/O for remote control.
Programming time zones, schedules, and using the DC50/DM50 display.
Mapping BMS addresses and understanding unit error codes.
Schematic diagrams illustrating system components and circuits.
Specific diagram for the hot water coil hydraulic circuit.
Troubleshooting guide for common unit faults and symptoms.
Recommended schedule for routine preventative maintenance tasks.
General warranty terms, period, and exclusions.
Documentation of unit certifications and conformity.
To Next Page