Lennox Baltic BHK 070 - CONTROL COMMUNICATION LINKS

IOM / ROOFTOP BALTIC Series - 0704-E Page 93
Selected Time
zone
"prg" changes
the time zone
(3310) 01(3310) 01
(3310) 01(3310) 01
(3310) 01
Zone.AZone.A
Zone.AZone.A
Zone.A
1-ROOM SET :1-ROOM SET :
1-ROOM SET :1-ROOM SET :
1-ROOM SET :
24.0°C24.0°C
24.0°C24.0°C
24.0°C
2-Min % FA : 20 %2-Min % FA : 20 %
2-Min % FA : 20 %2-Min % FA : 20 %
2-Min % FA : 20 %
(3121) 01(3121) 01
(3121) 01(3121) 01
(3121) 01
min:00min:00
min:00min:00
min:00
HOUR STD:HOUR STD:
HOUR STD:HOUR STD:
HOUR STD:
14h max:2314h max:23
14h max:2314h max:23
14h max:23
Validate and
Back One level
Up one
level
Min Setting
Current Setting
Factory
Setting
Max
Setting
SELECT
RED
control interface dS50
Clock settings
The clock setting menu can be accessed from the main
menu by selecting the menu "SETTING" and then
navigating down through the sub-menus until page 102
(3120).
Selecting the HOUR for displays the page 3121 shown
bellow:
Zone Settings
From Main menu (0000) navigate down to sub-menu
"SETTINGS", zone settings (3310).
In this particular page, pressing the "prg" key, changes
the time zone. If "ROOM SET" is selected, this displays
the room set point for the specific time zone shown in the
top corner.
Pressing the "prg" validates any changes made, and
move to the next time zone. "ESC" does not validate the
changes and move back one step in the menu tree.
Pressing "ESC" at any time sends you back one level up
the menu tree. In the example shown above "ESC" must
be pressed 3 times to go back to the main menu (0000)
Pressing "ESC" will invalidate any changes made to a
value in a setting page.
Alarms
Select the alarm menu using the arrow keys and press
return.
The faults history is then displayed in the page (1000):
Pressing the "ALARM" key resets all the alarms
The number of active alarms goes to 0, no active alarm
shown in the menu, the "bell" key is switched off.
Pressing the "return" key will display details of the
selected alarm
(1000) 01 Alarm 00(1000) 01 Alarm 00
(1000) 01 Alarm 00(1000) 01 Alarm 00
(1000) 01 Alarm 00
01-03/03.12h10 = 12701-03/03.12h10 = 127
01-03/03.12h10 = 12701-03/03.12h10 = 127
01-03/03.12h10 = 127
0202
0202
02
03/03.12h05 = 12503/03.12h05 = 125
03/03.12h05 = 12503/03.12h05 = 125
03/03.12h05 = 125
03-27/02.12h03 = 12503-27/02.12h03 = 125
03-27/02.12h03 = 12503-27/02.12h03 = 125
03-27/02.12h03 = 125
Number of
active Alarm
Selected Alarm
Alarm Date
and Time
Active * or
Inactive =
RED
RESET
Alarm
code
(1000) 01 Alarm 02(1000) 01 Alarm 02
(1000) 01 Alarm 02(1000) 01 Alarm 02
(1000) 01 Alarm 02
01-03/03.12h10*12701-03/03.12h10*127
01-03/03.12h10*12701-03/03.12h10*127
01-03/03.12h10*127
0202
0202
02
03/03.12h05*12503/03.12h05*125
03/03.12h05*12503/03.12h05*125
03/03.12h05*125
03-27/02.12h03 = 12503-27/02.12h03 = 125
03-27/02.12h03 = 12503-27/02.12h03 = 125
03-27/02.12h03 = 125
(3121) 01(3121) 01
(3121) 01(3121) 01
(3121) 01
Zone.AZone.A
Zone.AZone.A
Zone.A
min:8.0min:8.0
min:8.0min:8.0
min:8.0
Room setRoom set
Room setRoom set
Room set
std :20.0std :20.0
std :20.0std :20.0
std :20.0
21.0°C21.0°C
21.0°C21.0°C
21.0°C
max:35.0max:35.0
max:35.0max:35.0
max:35.0
(1100) 01 Alarm 00(1100) 01 Alarm 00
(1100) 01 Alarm 00(1100) 01 Alarm 00
(1100) 01 Alarm 00
03/03.12h05 = 12503/03.12h05 = 125
03/03.12h05 = 12503/03.12h05 = 125
03/03.12h05 = 125
Compressor 2Compressor 2
Compressor 2Compressor 2
Compressor 2
High pres/elec.powerHigh pres/elec.power
High pres/elec.powerHigh pres/elec.power
High pres/elec.power
(0000)01(0000)01
(0000)01(0000)01
(0000)01
ZoneAZoneA
ZoneAZoneA
ZoneA
1-ALARM1-ALARM
1-ALARM1-ALARM
1-ALARM
12h4412h44
12h4412h44
12h44
2-Data Tuesday2-Data Tuesday
2-Data Tuesday2-Data Tuesday
2-Data Tuesday
3-Setting April 033-Setting April 03
3-Setting April 033-Setting April 03
3-Setting April 03
(3120) 01(3120) 01
(3120) 01(3120) 01
(3120) 01
1-HOUR1-HOUR
1-HOUR1-HOUR
1-HOUR
12h12h
12h12h
12h
2-Minute2-Minute
2-Minute2-Minute
2-Minute
44mn44mn
44mn44mn
44mn
3-Day3-Day
3-Day3-Day
3-Day
44
44
4