Page 8
OPTIONAL ACCESSORIES GCS16823 & GCS16953 (Ordered Extra)
Unit Model No. GCS16823 & GCS16953
**LPG Conversion Kit
LB83188A (823) 67H33
LB55755DA (953) 32G88
Roof Mounting Frame RMF1695 (32G90)
Economizer Dampers
No. & size of filters (in.)
REMD16M95 (74G22)
(2) 16 x 25 x 1
Horizontal Economizer Dampers
No. & size of filters (in.)
EMDH16M95 (24H03)
(2) 16 x 25 x 1
Exhaust Dampers (Net Face Area) GED1695/135/160 (0.43 sq. ft.) (34G80)
Differential Enthalpy Control 54G44
Horizontal Supply and Return Air Kit (LB55756BA) 34G71
Bottom Power Entry Kit (LB55757CA) 34G70
Ceilin
Su
l
and
StepDown RTD1195 (29G04)
Return Air
Diffusers
Flush FD1195 (29G05)
(Net Weight)
Transition SRT1695 (33G96)
Outdoor Air Dampers
No. & size of filters (in.)
OAD1695 (35G26)
(1) 16 x 20 x 1
Automatic OAD16 Damper Kit 35G21
Low Ambient Control Kit (LB57113BG) 15J80
TimedOff Control (2) LB50709BA 40G20
**For LPG units a field conversion kit is required and must be ordered extra.
OPTIONAL ACCESSORIES GCS161353 & GCS161603 (Ordered Extra)
Unit Model No. GCS161353 GCS161603
**LPG Conversion Kit LB55755BA (32G88)
Roof Mounting Frame RMF16135/160 (32G91)
Economizer Dampers
No. & size of filters (in.)
REMD16M135
(2) 16 x 25 x 1 (74G23)
REMD16M160
(2) 20 x 25 x 1 (51G25)
Horizontal Economizer Dampers
No. & size of filters (in.)
EMDH16M135
(2) 16 x 25 x 1 (24H04)
EMDH16M160
(2) 20 x 25 x 1 (24H05)
Exhaust Dampers (Net Face Area) GED1695/135/160 (0.43 sq. ft.) (34G80)
Differential Enthalpy Control 54G44
Horizontal Supply and Return Air Kit LB55756BB (35G42) LB55756BC (51G27)
Bottom Power Entry Kit (LB55757CA) 34G70 Furnished
StepDown RTD11135 (29G05) RTD11185 (29G06)
e
ng
upp
y an
Return Air
Flush FD11135 (29G09) FD11185 (29G10)
Diffusers
Transition SRT16135 (97H10) SRT16160 (97H11)
Outdoor Air Dampers
No. & size of filters (in.)
OAD16135 (35G25)
(1) 16 x 20 x 1
OAD16160 (51G30)
(1) 16 x 20 x 1
Automatic OAD16 Damper Kit 35G21
Low Ambient Control Kit LB57113BH (16J86) LB57113BJ (16J87)
TimedOff Control (2) LB50709BA 40G20
**For LPG units a field conversion kit is required and must be ordered extra.