Lennox LI009CI-160T432 - Removal Procedure of Outdoor Unit

86
Installation and Maintenance
Service Manual
11.2 Removal Procedure of Outdoor Unit
2. Remove top panel
1. Remove big handle
Top panel
Screws
Screw
Procedure
Step
Screws
3. Remove front grille
Screw
Remove the screw fixing big handle; slide
out the big handle down wards to make the
clasp of big handle separate from the groove
of right side plate, and then remove the big
handle.
LI009CO-160T432 LI012CO-160T432
Big handle
Remove the screws fixing top panel and then
remove the top panel.
Remove the 4 screws connecting the grille and
outer case, and then remove the panel grille.
Grille
Screws
Note:There is no 4-way valve assy of this model.