85
Installation and Maintenance
Service Manual
6. Removal of sound-proof sponge
Remove screws fixing
isolation sheet and then
remove the sheet.
Isolation
sheet
8. Removal of valve
Unsolder gas and liquidvalves and then remove
the screws fixing valvesupports.
valves with the supports. Remove screws fixing
valve and then, remove
Valve
Before unsoldering, wrap the
valve completely with wet cloth to
prevent the valve from being
damaged by high temperature.
Tear sound-proof sponge with caution.
7. Removal of isolation sheet
Sound-proof sponge
Remove
Steps
Procedure
To Next Page
Loading...
