Operation of Remote Controller
Remote controller description
Press this button to turn on the unit. Press this button again to turn off the unit.
Press this button to go into the SLEEP operation mode. Press it again to cancel this function.
This function is available in COOL, HEAT (Only for models with heating function) or DRY
mode to maintain the most comfortable temperature for you.
ON/OFF :
MODE :
Press this button to decrease set temperature. Hold it down for above 2 seconds to
rapidly decrease set temperature. In AUTO mode, set temperature is not adjustable.
Press this button to increase set temperature. Hold it down for above 2 seconds to
rapidly increase set temperature. In AUTO mode, set temperature is not adjustable.
Auto
Speed 1 Speed 2 Speed 4
Speed 3
Press this key to activate or deactivate the swing.
SLEEP:
1
2
3
4
5
6
7
AUTO
COOL
DRY
FAN HEAT
*
*Note: Only for modelswith heating
function.
:
:
FAN
-
+
:
SWING
:
This button is used for setting Fan Speed in the sequence that goes from AUTO,
, then back to Auto.
,
,
to
Each time you press the button, a mode is selected in a sequence that goes from AUTO,
COOL, DRY, FAN,and HEAT
*
,as the following:
To Next Page
Loading...
Need help?
General
