Page 1
INSTALLATION
INSTRUCTIONS
ML195UH
507268-03
02/2019
Supersedes 07/2018
THIS MANUAL MUST BE LEFT WITH THE
HOMEOWNER FOR FUTURE REFERENCE
This is a safety alert symbol and should never be
ignored. When you see this symbol on labels or in man-
uals, be alert to the potential for personal injury or death.
CAUTION
As with any mechanical equipment, contact with sharp
sheet metal edges can result in personal injury. Take
care while handling this equipment and wear gloves and
protective clothing.
WARNING
Improper installation, adjustment, alteration, service
or maintenance can cause property damage, personal
injury or loss of life. Installation and service must be
performed by a licensed professional HVAC installer or
equivalent, service agency, or the gas supplier.
© 2019 Lennox Industries Inc.
Dallas, Texas USA
MERIT
®
SERIES GAS FURNACE
UPFLOW / HORIZONTAL AIR DISCHARGE
Contents
Unit Dimensions - inches (mm) ......................................2
ML195UH Gas Furnace..................................................3
Shipping and Packing List ..............................................3
Safety Information ..........................................................3
Use of Furnace as Construction Heater .........................4
General ...........................................................................5
Combustion, Dilution & Ventilation Air ............................5
Installation - Setting Equipment ......................................8
Filters ............................................................................13
Duct System .................................................................13
Pipe Fittings Specications...........................................13
Joint Cementing Procedure .......................................... 15
Venting Practices ..........................................................16
Vent Piping Guidlines ...................................................17
Gas Piping ....................................................................35
Electrical .......................................................................38
Unit Start-Up .................................................................41
Gas Pressure Adjustment .............................................42
Proper Cumbustion.......................................................43
High Altitude Information ..............................................43
Testing for Venting and Combustion Air........................44
Repair Parts List ...........................................................44
Other Unit Adjustments.................................................45
Service..........................................................................46
Twinning ......................................................................47
Start-Up & Performance Check List .............................48
To Next Page
Need help?
General