DC Inverter Multi VRF System
6
3 Preparation before Installation
NOTE:
Graphics here are only for reference. Please refer to actual products. Unspecified
dimensions are all in mm.
3.1 Standard Parts
Please use the supplied standard parts as required.
1 User Manual
1
2
Wiring (match with
resistance)
1
Must be connected to the
last IDU of communication
3 Corrugated pipe
1
4 Chassis gluey plug
3
5 Drainage joint
1
6
Tube Connector
Sub-assay
1
VEP027N432US
VEP034N432US
VEP042N432US
NOTE:
Some accessories are not available for some models. Please refer to the present
product for details.