Lennox VRF VEC034N432U User Manual

Mini VRF
Cooling Only System
User Manual
 
and keep it for further reference.
VEC027N432U
VEC034N432U
VEC042N432U
VEC048N432U
VEC055N432U
VEC060N432U

Lennox VRF VEC034N432U Specifications

General

Category	Air Conditioner
Cooling Capacity	34, 000 BTU/h
Heating Capacity	38, 000 BTU/h
Refrigerant	R410A
Model	VEC034N432U
Power Supply	208-230V, 60Hz

Summary

Safety Notices

General Safety Warnings and Precautions

Covers critical warnings, cautionary notes, and general safety instructions for safe operation.

Electrical, Refrigerant, and Installation Safety

Ensures safe electrical connections, grounding, refrigerant handling, and installation practices.

Operation and Environmental Safety

Ensures safe operation, environmental considerations, and prevention of hazards.

Connection Pipe

Piping Diagrams and Allowable Lengths

Allowable Length and Height Difference of Connection Pipe

Piping Parameters for Specific Models

Installation of Connection Pipe

Pipe Connection, Flaring, and Bending

Indoor Pipe Connection

Indoor Pipe Connection Procedure and Torque

Step-by-step guide for connecting indoor unit pipes, including torque specifications.

Outdoor Pipe Connection

Outdoor Pipe Connection and Insulation

Installation of Y-type Branch

Y-type Branch Installation Steps

Thermal Insulation for Pipeline

Pipeline Thermal Insulation Requirements

Vacuum Pumping, Refrigerant Adding

Vacuum Pumping Procedure

Steps for performing vacuum pumping on the system to remove air and moisture.

Refrigerant Adding

Refrigerant Quantity and Charging Calculation

Information on refrigerant quantities and methods for calculating and adding refrigerant.

Electric Wiring

Wiring Notices and Grounding Requirements

Important notices, precautions, and grounding requirements for electrical wiring.

Wiring Diagram

Power and Communication Wiring Diagrams

Circuit Breaker and Power Cord Selection

Check Items after Installation and Test Operation

Post-Installation Check Items

A checklist of essential items to verify after completing the installation.

Test Operation and Debugging

Test Operation and Debugging Preparation

Steps to prepare for test operation and debugging, including preheating and software connection.

Debugging Procedures and Codes

Details of the debugging process, including progress stages, codes, and operations.

Debugging Stages 05-07

Explanation of debugging stages 05 through 07, covering communication and component checks.

Debugging Stages 08-17

Explanation of debugging stages 08 through 17, including valve status and operational modes.

Common Malfunctions and Troubleshooting

Troubleshooting Common Operational Issues

Error Indication

Non-Malfunction Conditions and Indoor Error Codes

Error Code

Outdoor Unit Error Codes (E0-Ed)

Outdoor Unit Error Codes (U2-UC)

Outdoor Unit Error Codes (FP-HJ)

Debugging Error Codes