H. Reset the camera
When the camera is on, insert a needle or a pin into the RESET HOLE(I) and press the reset button
inside, the camera will be reset.
When will you need to reset the camera?
When the camera doesn’t work properly or it can be turned off, you need to reset it.
I. Installation
(1) Clip design: You can clip the camera on a pocket, backpack or other objects.
(2) MAGNET(G): The camera will attract on ferromagnetic metal objects and frames.
(3) M6 SCREW HOLE(K): You can fix the camera on a camera tripod or bicycle holder which is
compatible with M6 screws.
To Next Page
Loading...