Chapter 2. Using Your Computer
27
To set a User Password:
1 Turn on your computer. Press F2, while the initial screen is displayed.
The BIOS Setup Utility screen opens.
2 Select Security, using the cursor directional keys.
3 Select Set User Password, and press the Enter key. The Set User
Password window opens.
4 Choose your user password, which can be from one to eight
alphanumeric characters in any combination. Type it in the Enter New
Password field.
5 Press the Enter key once to move to the Confirm New Password field.
Retype the password you just entered to verify it.
6 Commit your password to memory, and press the Enter key.
7 Press F10 to exit.
8 Select Yes in the Setup Confirmation window.
Note:
You can set the User Password only when the Supervisor Password
havebeen set.
Lenovo 3000 G430-G530 UG V1.0_en.book Page 27 Tuesday, July 1, 2008 7:51 PM
To Next Page
