Need help?Do you have a question about the Lenovo Flex System Fabric EN4093R and is the answer not in the manual?
Before installing this product, read the Safety Information.
Preparatory steps and information required before installing the switch.
Locate and record product information (serial, part numbers) for future reference.
Provides general instructions and precautions for installing the switch in the chassis.
Provides precautions to avoid damage from static electricity during installation.
Step-by-step instructions for physically installing the switch into the chassis.
Provides instructions for safely removing and replacing the switch from the chassis.
Details how to connect various types of ports, including RJ-45 and modular ports.
Guidelines for installing and removing SFP+ and QSFP+ transceiver modules.
Step-by-step guide for installing an SFP+ module into the switch port.
Step-by-step guide for installing a QSFP+ module into the switch port.
Guides on configuring a TCP/IP interface for remote management via the CMM.
Instructions for accessing the switch CLI using SSHv2 or Telnet.
How to log in and configure the switch via the serial port.
Steps to access and configure the switch using a web browser.
Procedure for upgrading the switch firmware using FTP, TFTP, or SFTP.
Describes how to view POST results and identify noncritical or critical errors.
To Next Page
General