Need help?Do you have a question about the Lenovo CN4093 and is the answer not in the manual?
General| Product Type | Switch |
|---|---|
| Form Factor | Rack-mountable |
| Data Transfer Rate | 10 Gbps |
| Forwarding Rate | 1.44 Bpps |
| VLANs | 4096 |
| Power Supply | Dual power supplies |
| Dimensions | 17.3 x 16.1 x 1.7 inches |
Provides cautions, warnings, and danger statements for safe operation.
Preparatory steps including recording product information and installation guidelines.
Precautions to prevent damage from electrostatic discharge during handling.
Step-by-step instructions for installing the switch into a Lenovo Flex System chassis.
Procedures for safely removing and replacing the switch in the chassis.
Guidance on connecting various port types, including serial, RJ-45, SFP+, and QSFP+.
Information on installing and removing SFP+ and QSFP+ transceiver modules.
Steps to configure TCP/IP interface for remote management via CMM.
How to enable external ports for switch management and data traffic.
Instructions for connecting to the switch using SSHv2/Telnet client.
Guide to connecting and logging in via the serial console port.
Steps to access the switch using a web browser.
Detailed steps for upgrading the switch firmware using TFTP/SFTP.
How to view POST results and identify noncritical/critical errors.
To Next Page
