Need help?Do you have a question about the Lenovo ThinkSystem NE1032T RackSwitch and is the answer not in the manual?
General| Model | NE1032T |
|---|---|
| Form Factor | 1U |
| Ports | 32 |
| Switching Capacity | 640 Gbps |
| Jumbo Frame Support | Yes |
| Jumbo Frames | 9KB |
| Manageable | Yes |
| Layer | Layer 2/3 |
| Input Voltage | 100-240V AC |
| Weight | 4.5 kg |
| Product Type | Switch |
| Product Series | ThinkSystem |
| Switch Type | RackSwitch |
| Port Type | 10 Gigabit Ethernet |
| MAC Address Table Size | 32K |
| Management | Web, CLI, SNMP |
| Power Supply | Internal |
| Operating Temperature | 0 °C to 40 °C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 5% to 95% non-condensing |
| Dimensions (W x D x H) | 440 mm x 420 mm x 44 mm |
| Warranty | 1 year |
Provides the URL for downloading the specific ONIE image for the NE1032T.
Details the physical features of the NE1032T switch, including front and rear panel components.
Explains how to connect and configure the mini-USB serial console port for switch management.
Identifies the locations of temperature sensors on the NE1032T CPU board and main board.
Guide to acquiring and installing the Feature on Demand (FoD) license key necessary for ONIE.
Steps for downloading and uploading the ONIE image to the switch via CLI.
Process for booting the switch into ONIE install mode to deploy a new Network OS.
Process for booting the switch into ONIE uninstall mode to remove the current Network OS.
Process for booting the switch into ONIE update mode to upgrade ONIE firmware.
Process for booting the switch into ONIE rescue mode for system recovery.
Instructions on how to access the ONIE submenu via the Boot Management Menu.
To Next Page