Lenovo Flex System Fabric EN4093R User Manual

14 EN4093R 10 Gb Scalable Switch User’s Guide
Note:
•
I/O bays 1 and 2 support any standard Lenovo Flex System switch or pass-thru
module. When you install an I/O network adapter in the left-most fabric connector
on the compute node, these I/O bays support any switch with the same type of
network interface that is used by the corresponding network adapter.
• I/O bays 3 and 4 support any standard Lenovo Flex System switch or pass-thru
module. When you install an I/O network adapter in the right-most fabric
connector on the compute node, these I/O bays support any switch with the
same type of network interface that is used by the corresponding network
adapter.
• The compute nodes or Lenovo Flex System chassis that are described or shown
in this document might be different from your compute node or
Lenovo Flex
System chassis. For additional information, see the documentation that comes
with your
Lenovo Flex System chassis.
• When the switch is installed in a Lenovo Flex System chassis, the internal ports
operate at 1 Gigabits per second (Gbps) or 10 Gbps. The external ports can
operate at 1 Gbps, 10 Gbps, or 40 Gbps, depending on the port type and
installed transceiver modules.

Lenovo Flex System Fabric EN4093R Specifications

General

Brand	Lenovo
Model	Flex System Fabric EN4093R
Category	Switch
Language	English