Connect to a wireless display
Ensure that:
• Both your computer and the display support Miracast
®
technology.
• The display is connected to the same Wi-Fi network as your computer and is discoverable.
Step 1. Press Windows key + K.
The computer searches for wireless display devices and audio devices and lists the results.
Step 2. Select the display you want to connect to, and then follow the on-screen instructions.
Change display settings
Step 1. Right-click on a blank area on the desktop, and then select Display settings.
Your computer shows the Display window.
Step 2. Select the display for which you want to change the settings.
Step 3. Change the display settings as necessary.
Set the display mode
Step 1. Press or Fn + .
Your computer shows a list of display modes, with the current mode highlighted.
Step 2. Select a display mode from the list.
Enroll your fingerprints (for selected models)
You can use the biometric fingerprint option to sign in to Windows quickly if your computer includes a
fingerprint sensor. This sign-in option provides a reliable and secure way of identity verification.
Step 1. Select Start ➙ Settings ➙ Accounts ➙ Sign-in options.
Step 2. Under Ways to sign in, select Fingerprint recognition (Windows Hello) to set up sign-in with a
fingerprint sensor.
Step 3. Follow the on-screen instructions to enroll your fingerprints.
Notes:
• You need to set up a PIN code before you are allowed to use this sign-in option.
• It is recommended that you enroll multiple fingerprints in case of any injuries to your fingers.
20
User Guide
To Next Page
Loading...
Need help?
General