Chapter 3.Reference information
This section contains monitor specications, instructions to manually install the monitor
driver, troubleshooting information.
Monitor specications
Table 3-1. Monitor specications for type-model R27q-30
Dimensions Depth 258.75 mm (10.19 in.)
Height 527.36 mm (20.76 in.)
Width 613.58 mm (24.16 in.)
Stand Tilt Range: -5
o
~22
o
VESA mount Supported 100 mm x 100 mm (3.94 in. x 3.94 in.)
Image Viewable image size 685.8mm (27 in.)
Maximum height 335.664mm (13.24 in.)
Maximum width 596.736mm (23.54 in.)
Pixel pitch 0.2331(H) x 0.2331(W)
Power input Supply voltage
Max supply current
100-240V AC
1.5A
Power consumption
Note: Power
consumption gures
are for the monitor
and the power supply
combined.
Note: Typical power
consumption is tested
under OSD default
setting.
Normal operation <50 W (Max)
<30 W (Typical)
Standby/Suspend <0.5 W
Off
Note: without USB/
Webcam/external speaker
<0.3 W at 100VAC and 240VAC
DP Interface DP
Horizontal addressability 2560 pixels (max)
Vertical addressability 1440 lines (max)
Clock frequency 780 MHz (max)
HDMI Interface HDMI
Input signal VESA TMDS (Panel Link™)
Horizontal addressability 2560 pixels (max)
Vertical addressability 1440 lines (max)
Clock frequency 590 MHz (max)
Communications VESA DDC/CI
3-3 R27q-30 Flat Panel Monitor User’s Guide
To Next Page
Loading...
Need help?
General
