System upgrades
The S2200 can be upgraded to Lenovo Storage S3200 functionality by replacing the S2200 controllers with
the S3200 controllers during a planned offline maintenance window without the need to migrate or move
data and re-configure the attached hosts. The new S3200 controller recognizes the array configuration and
preserves the controller's host port parameters, such as FC World Wide Names (WWNs) or iSCSI Qualified
Names (IQNs).
For more information about the S3200 storage, including features, capabilities, and ordering information for
the S3200 controllers and other S3200 options, see the following Lenovo Storage S3200 Product Guide:
http://lenovopress.com/tips1299
Expansion enclosures
The S2200 supports attachment of up to three Lenovo Storage E1012 or E1024 expansion enclosures.
Intermix of E1012 and E1024 is supported. The enclosures can be added to the system non-disruptively.
The following table lists the models of the E1012 and E1024 expansion enclosure models.
Table 5. Part numbers for ordering E1012 and E1024 models
Description Part number
LFF models
Lenovo Storage E1012 LFF Disk Expansion Single SAS IO Module, Rail Kit, 9x5 NBD 64111B1
Lenovo Storage E1012 LFF Disk Expansion Dual SAS IO Module, Rail Kit, 9x5 NBD 64111B2
SFF models
Lenovo Storage E1024 SFF Disk Expansion Single SAS IO Module, Rail Kit, 9x5 NBD 64111B3
Lenovo Storage E1024 SFF Disk Expansion Dual SAS IO Module, Rail Kit, 9x5 NBD 64111B4
The part number for the E1012 or E1024 includes the following items:
One enclosure with two power supplies and fans and with two expansion modules installed
Two 4. 3m, 1 0A/100 - 250 V, C13 to IEC 320-C14 Rack Power Cables
Lenovo Storage SAN Rack Mount Kit: Rails 25-inch to 36-inch
Getting Started Guide
Warranty Flyer
Important Notices Flyer
Documentation Flyer
The E1012 and E1024 support single and dual expansion module configurations. Standard models of the
E1012 and E1024 ship with one or two expansion modules (for more information, see Table 5). Single
module configurations can be upgraded to dual module configurations non-disruptively. The number of
expansion modules in the E1012 or E1024 must match the number of RAID controllers in the S2200.
Each expansion module has two 6 Gb SAS x4 ports (Mini-SAS SFF-8088 connectors) that are labelled IN
and OUT. These ports are used for connections to the S2000 and for daisy chaining the E1012 and E1024
enclosures between each other. The expansion port on the S2200 controller is connected to the IN port on
the expansion module. The OUT port on the expansion module is connected to the IN port on the expansion
module in the adjacent enclosure, and so on.
To Next Page
Loading...
