Lenovo System x3850 X6 - Page 357

Table 63. LCD display panel messages (continued)
Message Description
Amount of time before
the system timeout if no
activity
Action
IMM: THERMAL IMM is loading the
kernel.
After 15 minutes of no
activity or 10 IMM reboot
cycles
1. Disconnect the
power from the
server.
2. Perform a web or
inband flash of the
IMM firmware using
TFTP burn.
IMM: FLASH MNGR
IMM is loading the
kernel.
After 15 minutes of no
activity or 10 IMM reboot
cycles
1. Disconnect the
power from the
server.
2. Perform a web or
inband flash of the
IMM firmware using
TFTP burn.
IMM: UEFI SYNC IMM is loading the
kernel.
After 15 minutes of no
activity or 10 IMM reboot
cycles
1. Disconnect the
power from the
server.
2. Perform a web or
inband flash of the
IMM firmware using
TFTP burn.
Appendix A. LCD display panel messages 343