UC Settings configurable items
The following table and example provides the settings and values for the general
configurable items of the UC Settings key:
Table 6. UC Settings\General
Configurable item Description Value Action
General\Disable Disables the
EasyUpdate user
interface. Use this
setting when you
want to configure
EasyUpdate using
the Command
Prompt.
Default value: NO
v If YES, the
EasyUpdate user
interface will not
display.
v If NO, the
EasyUpdate user
interface will not be
disabled.
Possible values:
v YES
v NO
Example:
\GENERAL
\Disable = NO
UC Settings\HTTPSHelloSettings configurable items
The following table and example provides the settings and values for the
HTTPSHelloSettings for the UC Settings key:
Table 7. \UC Settings\HTTPSHelloSettings
Configurable item Description Value Action
RetryLimit Maximum number
of times that
EasyUpdate will try
to connect to the
Lenovo Help Center
Web site.
Default value: 0 EasyUpdate will stop
trying to connect to the
Lenovo Help Center
Web site after the
connection attempts
reach the maximum
number of tries entered
in this value.
Possible values: Any
valid integer
RetryWaitTime Maximum time
before EasyUpdate
tries to connect to
the Lenovo Help
Center Web site
after the previous
attempt fails.
Default value: 0 EasyUpdate will wait
the number of seconds
specified in this value
when attempting to
connect to the Lenovo
Help Center Web site
after the previous
attempt fails.
Possible values: Any
valid integer
ServerName This setting will
disable the
EasyUpdate
application upgrade
function (Update
Thyself).
The default value is
pre-configured to
connect to the
Lenovo Help Center
Web site.
EasyUpdate checks the
Lenovo Help Center
Web site for updates
for itself, even if it is
connecting to a local
system or network
share repository. You
can disable the Web
upgrade for
EasyUpdate by clearing
this value.
Possible values:
Server name or
empty
Example:
16 EasyUpdate Solution Deployment Guide
To Next Page
Loading...
Need help?
General