• “Startup menu” on page 27
• “Exit menu” on page 28
Main menu
After entering the Setup Utility program, you can see the Main menu. The menu lists basic information about
your server, such as the BIOS, CPU type, memory, and system date and time.
Devices menu
You can view or change various device settings on the Devices menu in the Setup Utility program. Some
items are displayed on the menu only if the server supports the corresponding features.
The Devices menu contains the following items.
Menu item Description
Serial Port Setup View and set serial port configuration parameters.
USB Setup View and set USB configuration parameters.
ATA Drive Setup View and set SATA storage drive configuration parameters.
Video Setup
View and set the primary video adapter type.
Audio Setup Enable or disable the onboard audio controller.
Network Setup Enable or disable the onboard Ethernet controller and other network features.
Advanced menu
You can view or change various server component settings on the Advanced menu in the Setup Utility
program. The Advanced menu contains various configuration items. Some items are displayed on the menu
only if the server supports the corresponding features.
The Advanced menu contains the following items.
Menu item Description
CPU Setup View information about the installed CPU and set CPU configuration parameters.
Intel®Manageability View and set Intel Manageability configuration parameters.
Intel SIPP Support Enable or disable the Intel SIPP Support feature.
CPU CRID Support Enable or disable the CPU CRID Support feature.
Chipset CRID support Enable or disable the Chipset CRID Support feature.
Power menu
You can view or change server power options on the Power menu in the Setup Utility program.
The Power menu contains the following items.
Menu item Description
After Power Loss View and configure the system performance after the ac power is interrupted.
Enhanced Power Saving Mode Enable or disable Enhanced Power Saving Mode.
26 ThinkServer TS150 User Guide and Hardware Maintenance Manual
To Next Page
Loading...
